industrial overhead anti-static esd ionizer air fan
◆ Product Features
1. Touch the switch button for convenient and quick operation for the new style.
2. There're more air outlets and a lot of ions are produced for Such Ionizer.
3. With automatic needle brushing function after booting.
4. The default is to automatically brush the needle every 8 hours, without manual cleaning and maintenance of the needle.
5. Five-speed fan speed regulation, stable performance.
6. The liquid crystal display can display the device address, wind speed gear, and cleaning cycle, as shown in the figure below:
7. When the fan fails and the ion balance is abnormal, the red light will alarm all the time.
8. The ion output characteristics of this Ionizer can be adjusted remotely.
9. Realize network communication and monitor the working status of the fan.
10. Pass the CE test and have electromagnetic protection function, which will not cause electromagnetic interference to other Ionizer; it can also effectively prevent external electromagnetic interference from affecting the normal operation of the fan.
11. The whole Ionizer adopts a modular structure, which is convenient for disassembly, assembly and maintenance in all.
|Model No||AP-DJ2814 Ionizer|
|Input voltage||DC 24V (dual RJ45 interface)|
|Ion emission||DC model|
|Noise||<75dBA(150mm from air outlet)|
|Ozone thickness||≤0.05ppm(150mm from air outlet)|
|Discharge speed||≤1.5S(300mm from air outlet)|
Boot instant-blue light function
Normal working -Green light(Under monitoring)
Fan alarm -Red light flash with beeping
Ionization abnormal-Red light slow flash with beeping
Blue light blinks when infrared debugging
|Working temperature||0℃-50℃ working place|
|Working humidity||<70%RH as tested|
1. Interface power supply (default configuration):
INPUT: AC100—240V 50 / 60Hz;
OUTPUT: DC24V 2A (dual RJ45 interface)
2. Jack-type power supply (customized):
INPUT: AC100—240V 50 / 60Hz;
OUTPUT: DC24V 2A (5.5 * 2.5 single male head)
Integrated power supply
OUTPUT: DC24V 2A (16 RJ45 interfaces)
|Shell material||Aluminum dusting|
|Installation accessories||1 pair of U-shaped aluminum powder spraying mounting bracket, 2 pairs of stainless steel screw handles (M5 × 8)|
|Weight||Bare metal (including bracket) 1125g|
|Net weight (network cable, power cord, adapter, remote control) 1590g|
|Gross weight 2080g|
◆ Safety warning
1. Please read the instruction manual carefully before installing and using this Ionizer.
2. The whole set of Ionizer must be reliably grounded during use.
3. It is not suitable to use this Ionizer in a humidity environment> 70%.
4. It is strictly forbidden to use this equipment in flammable and explosive environments.
5. Unauthorized disassembly of the product is strictly prohibited, internal maintenance and repair must be performed by professionals.
6. It is strictly forbidden to touch the product with water stains, otherwise an abnormality will occur and cause electric shock or fire.
7. To check or replace the product, the power must be turned off, otherwise it may cause electric shock or fire.
8. The product is specially designed to eliminate static electricity, and it is strictly prohibited to use it for other purposes. Any abnormal use may cause machine failure, electric shock, fire and other hidden dangers.
9. When the power is on, it is strictly forbidden to touch the electrode needle, otherwise it is easy to cause malfunction and electric shock accident.
10. The discharge needle is a sharp metal object, please use it carefully.
11. Before powering on the product, please check the specifications of the power supply. Any power supply that does not meet the specifications will cause damage or even malfunction to the product.
12. Please check the product power cord/communication line regularly, and replace it immediately if it is damaged, otherwise it is easy to cause problems such as electric leakage, poor communication, and abnormal operation.
◆ Use and installation
1. Installation and use guidance:
(1) Choose the best power dissipating position, and install the fan and the matching power adapter firmly.
(2) Insert the power network cable connected to the adapter into the RJ45 power socket of the ion blower, and plug the three-phase power socket into the power strip.
(3) Lightly touch the power switch on the front panel of the ion blower, the ion blower will automatically brush the needles after the ion blower is turned on, and the blower works normally when the indicator light is green.