1. Touch the switch button, the operation is convenient and fast.
2. With multiple air outlets, a large amount of ion generation.
3. It has the function of automatically brushing needles after starting up.
4. The default is to automatically brush the needle once every 8 hours, eliminating the need for manual cleaning and maintenance of the needle.
5. Five-speed fan speed regulation, stable performance.
6. With LCD display, it can display equipment address, wind speed gear, cleaning cycle, as shown in the following figure:
7. When the fan fails and the ion balance is abnormal, the red light alarms.
8. Ion output characteristics can be adjusted by remote control.
9. It can realize network communication to monitor the working status of the fan.
10. Pass the CE test and have electromagnetic protection function, which will not cause electromagnetic interference to other equipment; it can also effectively prevent external electromagnetic interference from affecting the normal operation of the fan.
11. The structure of the whole machine is modular, which is convenient for disassembly and maintenance.
◆ Safety warning
1. Please read the instruction manual carefully before installing and using this equipment.
2. The whole set of equipment must be reliably grounded during use.
3. It is not suitable to use this equipment in a humidity environment> 70%.
4. It is strictly forbidden to use this equipment in flammable and explosive environments.
5. Unauthorized disassembly of the product is strictly prohibited, internal maintenance and repair must be performed by professionals.
6. It is strictly forbidden to touch the product with water stains, otherwise an abnormality will occur and cause electric shock or fire.
7. To check or replace the product, the power must be turned off, otherwise it may cause electric shock or fire.
8. The product is specially designed to eliminate static electricity, and it is strictly prohibited to use it for other purposes. Any abnormal use may cause machine failure, electric shock, fire and other hidden dangers.
9. When the power is on, it is strictly forbidden to touch the electrode needle, otherwise it is easy to cause malfunction and electric shock accident.
10. The discharge needle is a sharp metal object, please use it carefully.
11. Before powering on the product, please check the specifications of the power supply. Any power supply that does not meet the specifications will cause damage or even malfunction to the product.
12. Please check the product power cord/communication line regularly, and replace it immediately if it is damaged, otherwise it is easy to cause problems such as electric leakage, poor communication, and abnormal operation.
◆ Use and installation
1. Installation and use guidance:
(1) Choose the best power dissipating position, and install the fan and the matching power adapter firmly.
(2) Insert the power network cable connected to the adapter into the RJ45 power socket of the ion blower, and plug the three-phase power socket into the power strip.
(3) Lightly touch the power switch on the front panel of the ion blower, the ion blower will automatically brush the needles after the ion blower is turned on, and the blower works normally when the indicator light is green.
|Model No||AP-DJ2811 Air Blower|
|Input voltage||DC 24V (dual RJ45 interface)|
|Noise||<75dBA(150mm from air outlet)|
|Ozone thickness||≤0.05ppm(150mm from air outlet)|
|Discharge speed||≤1.5S(300mm from air outlet)|
Boot instant-blue light
Normal working -Green light(Under monitoring)
Fan alarm -Red light flash with beeping
Ionization abnormal-Red light slow flash with beeping
Blue light blinks when infrared debugging
1. Interface power supply (default configuration):
INPUT: AC100—240V 50 / 60Hz;
OUTPUT: DC24V 2A (dual RJ45 interface)
2. Jack-type power supply (customized):
INPUT: AC100—240V 50 / 60Hz;
OUTPUT: DC24V 2A (5.5 * 2.5 single male head)
Integrated power supply
OUTPUT: DC24V 2A (16 RJ45 interfaces)
|Installation accessories||1 pair of U-shaped aluminum powder spraying mounting bracket, 2 pairs of stainless steel screw handles (M5 × 8)|
|Weight||Bare metal (including bracket) 1125g|
|Net weight (network cable, power cord, adapter, remote control) 1590g|
|Gross weight 2080g|
◆ Industry applications
It can be widely used in electronics, semiconductor, optoelectronics and other industries.