Handheld Static Elimination Devices Ionizing Air Gun With Power Supply
AP-AC2456 ionizing air gun is produced by Anping Company (AP&T) to eliminate static electricity on the surface of objects. It is a fast and efficient dust removal device designed to provide electrostatic protection for the surface of the target object.
AP-AC2456 ionizing air gun uses AC high-voltage electricity and is connected to a dedicated emitter electrode to ionize the air to generate positive and negative ions. The compressed air is transported to the surface of the static-eliminated object to neutralize the positive and negative electrostatic charges to discharge efficiently.
Can be widely used in electronics, injection molding, printing, film industry and other industries.
1) Small size and portable to operate.
2) Excellent electrical performance index and good performance.
3) Fast static & dust removal.
4)Safe and reliable to work under the condition of high voltage and micro current.
5) Configure AP-AC2455-28 special high-voltage power supply.
|Input voltage||AC220V/50Hz or AC110V/60Hz|
|Discharge speed||≤2.0s (150mm from the front of ionizing air gun)|
|Ion balance||－50V～＋50V (150mm from the front of ionizing air gun)|
|Noise||≤65db (150mm from the front of ionizing air gun)|
|Wire length||2.5M (Can be customized according to requirements)|
|Compressed air connector||Φ8mm|
|Ion emission||Power frequency communication|
|Media used||Clean compressed air|
|Net weight||About 377g|
|Gross weight||About 437g|
|Supporting power supply||AP-AC2455-28A/B|
Testing instrument :3M-711 Static tester
Testing standard :SJ/T10694-2006,GB/T14437-97
Testing voltage :±1000 — ±100V Attenuation
Testing environment :Humidity 30%—50% Temperature 20±5℃
1. Please read the instruction manual carefully before installing and using this equipment.
2. The entire set of equipment must be reliably grounded during use, and the grounding resistance is less than 4 ohms; otherwise,ionizing air gun and high-voltage power supply may be abnormal or even damaged.
3. It is not suitable to use this equipment in the environment with >70% humidity.
4. It is strictly forbidden to use this equipment in flammable and explosive environments.
5. Unauthorized disassembly of the product is strictly prohibited, and internal maintenance and repairs must be performed by professionals.
6. The product is strictly prohibited from touching water stains, otherwise abnormality will occur, resulting in electric shock or fire.
7. When checking or replacing the product, the power must be turned off, otherwise it may cause electric shock or fire.
8. The product is specially designed to eliminate static electricity, and other uses are strictly prohibited. Any abnormal use may cause hidden troubles such as machine failure, electric shock, and fire.
9. It is strictly forbidden to touch the electrode needle when it is energized, otherwise it may cause malfunction and electric shock accident.
10. The discharge needle is a sharp metal object, please use it carefully.
11. Before the product is powered on, please check the specifications of the power supply. Any power supply that does not meet the specifications will cause damage or even failure to the product.
12. Please check the power cord of the product regularly, and replace it if it is damaged, otherwise it may cause problems such as leakage and abnormal work.
13. When using ionizing air gun, an air purification filter device should be installed at the air source interface to ensure that the gas entering the body of the air gun is dry and clean, so as to prevent the water vapor and grease in the air source from entering the nozzle part of the air gun and causing a high voltage short circuit, which affects Normal use.