AP-AB1215 None Air Source AC Pulse Ion Bar
General
AP-AB1215 AC pulse ion bar is the newest developed bar type static eliminator for static removing.
It can be widely used in electronics, plastics, chemicals, printing, textile, optical and other industries.
Product Feature
11.Bar shaped and cross over static eliminator
22.Adjustable positive and negative ion output rate
33.Manufactured by using the latest patented technology of static removing
44.Fast speed of static removing, low ion balance and high safety
55.Adjustable positive and negative ion frequency
66.With alarm function of high voltage fault
77.Remote control ion output
8.8.Shock-proof function prevent user from being electric shocked
9.9.Support integrate control ,easy to operate.
◆Specification
Model | AP-AB1215 |
Output voltage | DC±5.00(KV) |
Output frequency | 5, 30Hz (default) |
Duty factor | 10%-90% |
Power | 10W |
Working distance | 100-1000mm |
Ion balance | ≤|±30V| (AVE) |
Discharge time | ≤1S |
Working temperature | 0℃-50℃ |
Working humidity | <70% |
Bar Width | 335-410mm(spacing 25mm);460-2960(Spacing 50mm) |
Note | USD12.0 Per additional 100mm |
1,General
AP-AB1216 Air source AC pulse ion bar is the newest developed bar type static eliminator for static removing.
It can be widely used in electronics, plastics, chemicals, printing, textile, optical and other industries.
2,Features
With alarm function of ion volume, electrode tip cleaning and high voltage
Notice on use and safety warning
Installation guide
Outline dimensional drawing
2 | Static removing performance decline obviously | Pollute or damage of discharge pin | Clean or replace discharge pin |
Electrode pad not tightly screwed | Be sure the electrode pad screwed tightly | ||
Improper installation position | Confirm the optimum installation position | ||
3 | Static removing performance decline | There are conductor or other ion bar around | Remove conductor or other ion bar |
4 | HV Alarm | Electromagnetic disturb | Switch off and reset |
Abnormal discharge | Check installation position and be away from conductors | ||
Pollute or damage of discharge pin | Send back to manufacturer | ||
5 | Smoking or burning | Pollute or damage of discharge pin or electrode pad insulator | Send back to manufacturer |