Compact Anti Static Electricity Device Overhead Ionizer Low Power AP-DC2452-80
AP-DC2452-80 overhead ionizing air blower applies the DC current ion synchronous transmitting technology. High volume of positive and negative ion are generated by two independent transmitting electrode with direct current corona discharge and arrive the object surface where the static to be eliminated most equally. Eliminate static and control the remaining static under international standard.
AP-DC2452-80 is widely used in electronics,plastic,chemical,printing and optics industry etc.
1.Features
Fit for static elimination in large area
The combination of multi-units independent ion transmitting
Stepless adjustment of the air volume and longer lifelong of the fan
Fast speed of the elimination and stable performance of the circuit
Detachable cover net both front and back, convenient to clean and maintain
2. Industry Applications
Widely used in electronics, plastic,chemical,printing and optoelectronics industries
3.Specification
| Type | AP-DC2452-80 |
| Input Voltage | AC 220V /50Hz or 110V/60 Hz |
| Output Voltage | ±DC4000V-DC7000V |
| Power | 25W |
| Effective working range | 920*600(L*W) |
| Discharge speed | ≤3S (450mm testing center from the air outlet) |
| Ion balance | ≤ |±10V |(450mm testing center from the air outlet) |
| Air volume | 0~95CFM |
| Noise | ≤ 60db (150mm from the air outlet) |
| Ozone thickness | ≤ 0.02 ppm (150mm from the air outlet) |
| Working temperature | 0 ~ 50°C |
| Dimension | 840*175*124mm(L*W*H) |
| Net weight | 3930g |
| Gross weight | 5430g (including packaging accessories) |
| Test Data | |
| Test standard | ANST/ESD.STM3.1 ANST/RSD.SP3.3 SJ/T 11446-2013 |
| Test instrument | Trek157 |
| Test voltage | ±1000V→100V |
| Test environment | Relative humidity:50±5% |
| Temperature:23±3℃ | |
4.Working Ways(DC)
5.Elimination Effect
Testing instrument :3M-711 Static tester
Testing standard :SJ/T10694-2006,GB/T14437-97
Testing voltage :±1000 — ±100V Attenuation
Testing environment :Humidity 30%—50% Temperature 20±5℃
6.Outline Dimensional Drawing
7.Positioning
Installation
When using AP-DC2452-80 overhead ionizing air blower,the air transmitter should be vertical to the object which static to be removed. The trestle should be fixed on stable and plain surface such as wall by screw and nut.
AP-DC2452-80 overhead ionizing air blower should be put near working area or 300~900mm to the objective. By screw the knob on both side of the trestle the horizontal angle can be adjusted so that the optimal effect of static removing can be achieved.
Safety
(1)Be aware to read this user manual carefully before install and use this device.
(2)Do not locate this device in the environment with high moisture.
(3)Do not insert any object into air input entry and output exit.
(4)Do not use this device in the flammable and explosive surrounding.
(5)Internal maintenance and repairing must be done by professional engineers.
Our products are sold all over the world, you can rest assured.
